Products

Ruyang Precision: Control accuracy, control the future.

Home > Products

Dual axis manual turntable

This dual axis manual table is mainly used for simulating the static posture of the inner and outer rings of the tested part separately or simultaneously, and can also output accuracy or calibrate the angle of the inner and outer rings of the tested part. Both shafts are manually operated and have fine adjustment function and locking device.

This dual axis manual table is mainly used for simulating the static posture of the inner and outer rings of the tested part separately or simultaneously, and can also output accuracy or calibrate the angle of the inner and outer rings of the tested part. Both shafts are manually operated and have fine adjustment function and locking device.

1: Load weight 50Kg

2  Table size 550mm × 550mm

3   Table flatness 0.02mm

4   Axis rotation accuracy ± 2 ″

5  Axis perpendicularity ± 3 ″

6  Axis Intersection: Diameter ball with a diameter of 0.5mm

7   : Angular positioning error
                            Outer axis: ± 2 ″;

                            Inner axis: ± 2 ″;

8  Repetitive positioning of angular position ± 1.5 inches

9  : Corner range        Azimuth axis: 360 ° continuous rotation;

                                    Pitch axis: ± 45 °

10  Display mode degree: 0.0000-359.9999 °;

                                    Degrees, minutes, and seconds: 0 ° 0 ′ 0 ″ -359 ° 59 ′ 59 ″;

                                    Radiance: 0.0000-6.2832.

11  Display resolution; ：0.0001°

12 ：Lifting range ：900+250mm


Previous：2DT400GZ 2D tracking turntable Next：DT450 single axis turntable

Product Inquiry

Captcha
Back to List