0792-88989898 
ruya9898@163.com
2ST580-AH dual axis turntable with manual lifting and digital display position
The 2ST580-AH manual digital position turntable with lifting dual axis is mainly used for simulating the static posture of the inner and outer rings of the tested part separately or simultaneously, and can also output accuracy or calibrate the angle of the inner and outer rings of the tested part. Both shafts are manually operated and have fine adjustment function and locking device.
1 Performance indicators
(1) Load weight: 40Kg;
(2) The workbench is made of stainless steel, with a diameter of Φ 580mm and M6 threaded holes arranged 50X50mm around the axis;
(3) The shaft system can be locked at any position within any range of angles.
2 Accuracy indicators
Table flatness: 0.02mm
End face runout: 0.03mm
Directional axis:
1) Corner range: 360 ° continuous rotation
2) Position accuracy: ± 3 ″
3) Position repeatability: ± 1 ″
4) Tilt rotation accuracy: ± 2 ″
Pitch axis:
1) Angle range: -90 °~+90 °
2) Position accuracy: ± 5 inches
3) Position repeatability: ± 1.5 inches
4) Tilt rotation accuracy: ± 2 ″
Verticality of azimuth axis and elevation axis: ± 2 ″
Digital display: Display mode: Degrees: 0.0000-359.9999 °;
Degrees, minutes, and seconds: 0 ° 0 ′ 0 ″ -359 ° 59 ′ 59 ″;
Radiance: 0.0000-6.2832.
Lifting range: 750+200mm=(750~950) mm. The height can be adjusted freely within the lifting range, and locking it does not affect the accuracy of the turntable.